|
Agfa |
Select Agfa Specification
Agfa SelectSet 7000 Drum Imagesetter |
Agfa SelectSet 5000 Drum Imagesetter |
Agfa SelectSet Avantra 25 Drum Imagesetter |
Agfa AccuSet Plus Imagesetters |
|
||
| Imaging: | ||
| Max Image Area: | 22" x 25.7" | |
| Resoltuion: | 3600 dpi in 3 steps (1200, 2400, 3600 dpi) | |
| Throughput: | ||
| Raw Imaging Speed | 16.7 in./min @ 1200 dpi | |
| 8.3 in/min @ 2400 dpi | ||
| 5.5 in/min @ 3600 dpi | ||
| Accuracy: | ||
| Repeatability (on film): | ||
| Media: | ||
| Type | Red Sensitive, 13.3", 16" or 26" | |
| Film, paper, and plate | ||
| Output Cassette: | Cumulative | |
| Thickness: | .113 mm | |
| Technology: | |
| Design: | Internal Drum |
| Light Source: | Red Laser |
| Spot Size: | 20 microns @ 1200 dpi |
| 10 microns @ 2400 dpi | |
| 7.5 microns @ 3600 dpi | |
| Physical Characteristics: | |
| Size (HxWxD): | 38" x 60" x 24" (96.5 x 152.4 x 61 cm) |
| Weight: | 855 lbs (385 kg) |
| Electrical Requirements: | |
| Volts: | 115 VAC @ 5 A., 230VAC @ 2.5 A (nominal) |
| Hz: | 60Hz Domestic, 50 Hz International |
| Watts: | 575 Watts (nominal) |
| *Above information is for reference purposes only | TOP |
| **MKL is an independent equipment dealer |
|
||||
| Imaging: | ||||
| Max Image Area: | 15.7" x 22" (39.9 x 55.8 cm) | |||
| Resoltuion: | 3600 dpi | |||
| Throughput: | ||||
| Accuracy: | ||||
| Repeatability (on film): | ||||
| Media: | ||||
| Type: | Helium-neon paper, film, printing plates | |||
| Media widths : | 10" (25.4 cm), 13.3" (33.8 cm) and 16" (40.6) | |||
| Output Cassette: | Cumulative | |||
| Technology: | |
| Design: | Internal Drum |
| Light Source: | Helium-neon |
| Spot Size: | |
| Physical Characteristics: | |
| Size (HxWxD): | 38" x 45" x 24" (96.5 x 114.3 x 61.0 cm) |
| Weight: | 425 lbs. (193 kg) |
| Electrical Requirements: | |
| Volts: | |
| Hz: | |
| Watt: |
| *Above information is for reference purposes only | TOP |
| **MKL is an independent equipment dealer |
|
|||||||||||||||||||||||||
| Imaging: | |||||||||||||||||||||||||
| Max Image Area: | |||||||||||||||||||||||||
| Resoltuion: |
|
||||||||||||||||||||||||
| Throughput: | |||||||||||||||||||||||||
| Raw Imaging Speed | |||||||||||||||||||||||||
| Accuracy: | |||||||||||||||||||||||||
| Repeatability (on film): |
Repeatability of ± 1 mil over eight consecutive separations Images up to 22.5 inches per minute at 1,200 dpi |
||||||||||||||||||||||||
| Media: | |||||||||||||||||||||||||
| Type | Film RC paper Setprint polyester plate material Agfa Setprint* |
||||||||||||||||||||||||
| Output Cassette: | Take-up Cassette Capacity: 50 feet/15 m | ||||||||||||||||||||||||
| Technology: | |
| Design: | Capstan PostScript Laser Imagesetter |
| Light Source: | Visible red laser
diode (670 nm wavelength) Single-facet prism |
| Spot Size: | 35 microns (600
dpi) 20 microns (all other resolutions) |
| Physical Characteristics: | |
| Size (HxWxD): | Height:
39"/99 cm
Width: 32"/81.2 cm Depth: 29"/73.6 cm |
| Weight: | 355 lbs./115.5 kg |
| Electrical Requirements: | |
| Volts: | 115 V, 8A, 50/60
Hz (or 230V, 4A, 50/60 Hz) |
| *Above information is for reference purposes only | TOP |
| **MKL is an independent equipment dealer |
|
||||
| Imaging: | ||||
| Max Image Area: | 17.7 x 25" (449 x 635 mm) | |||
| Resoltuion: | 1,200 dpi (472
dots/cm) at 20 microns 1,800 dpi (708 dots/cm) at 15 microns 2,400 dpi (945 dots/cm) at 15 microns |
|||
| Throughput: | ||||
| Raw Imaging Speed | 1,200 dpi--417 sq.
in./ 2688 cm2 per minute 1,800 dpi--278 sq. in./ 1742 cm2 per minute 2,400 dpi--208 sq. in./ 1344 cm2 per minute |
|||
| Maximum Imaging Speeds at Full Area | 1,200 dpi--1:05 1,800 dpi--1:37 2,400 dpi--2:10 |
|||
| Accuracy: | ||||
| Repeatability (on film): | plus or minus 0.2 mils (5 microns) over eight consecutive 18 x 25" outputs. | |||
| Media: | ||||
| Type | Daylight-loading rolls 250' (76.2 m) at 4 mils (0.10 mm) thickness | |||
| Media Sizes: | Page Widths: 12" (30.48 cm) 13.3" (33.78 cm) 14" (35.58 cm) 16" (40.64 cm) 18" (45.72 cm) User definable from 12" (30.48 cm) minimum up to 18" (45.72 mm) maximum with FlexMedia |
|||
| Output Cassette: | ||||
| Thickness: | OptiFocus feature automatically adjusts depth of focus to accomodate media thickness from 4 to 8 mils (0.10 mm - 0.20mm) | |||
| Technology: | |
| Design: | |
| Light Source: | Visible red laser diode (650 micrometer wavelength |
| Spot Size: | 1,200 dpi (472 dots/cm) at 20 microns |
| 1,800 dpi (708 dots/cm) at 15 microns | |
| 2,400 dpi (945
dots/cm) at 15 microns |
|
| Physical Characteristics: | |
| Size : | Width: 47" (119
cm) Height: 48" (121 cm) Depth: 29" (73 cm) |
| Weight: | Weight: 750 pounds (340 kg) |
| Electrical Requirements: | |
| Volts: | 110/230 V |
| Hz: | 50/60 |
| Watts: | 300 |
| *Above information is for reference purposes only | TOP |
| **MKL is an independent equipment dealer |
MKL is an independent equipment dealer * All equipment is based on availability
bill@mklinc.com
marc@mklinc.com jeff@mklinc.com
Copyright © 1998 MKL Pre-press Electronics. All Rights Reserved.
Reproduction without permission is strictly prohibited.


Copyright © 2007 MKL
Inc.
Reproduction
without permission is strictly prohibited.
All rights reserved.