Linotype

 Specification

Heidelberg Quasar

Linotype-Hell 300 Capstan Imagesetter

Linotype-Hell 330 Capstan Imagesetter

Linotype Hell 3020 Drum Imagesetter

Linotype Hell 3030 Drum Imagesetter

 

 

Heidelberg Quasar
	Product Specifications:
System Description:	Precision internal drum laser reorder
Heidelberg Press Compatbility:	Automatic imagesetter system for outputting Quickmaster 46 format up to Speedmaster 52 format
Light Source:	Laser diode, emission wavelength 670-680 nm
Imaging principle:	Light beam deflected via a rotating, air-cushioned prism; inside drum
Imaging format:	20.7" x 19.9" for positive imaging
	Resolution pixel/cm	dpi	Max speed cm/min	Inch/min
Resolution and reorder speed:	500	1270	58.7	23.1
	666	1693	44.0	17.3
	1000	2540	29.3	11.5
	1333	3387	22.0	8.7
Spot size	Resolution dependent from 21 to 11 microns
Maximum Screen frequency	Up to 200 lpi with 256 gray scale levels; Up to 400 lpi w/ Deltatechnology and I.S.
Repeatability	+/- 0.2 mil over full format and eight successive films exposed consecutively, disregarding distorations in the photographic material caused by fluctuations in temperature and humidity
Output options	Positive, negative, right-reading, wrong-reading
Photographic materials in roll form	Daylight load film and RC paper; polyester plates, 4-7 mil think for sensitive emission wavelengths of 670-680nm
Materials width	11"-20.9" in increments of 1.2"
Capacity of supply cassette	Max. 197ft of 4mil thick photographic material
Capacity of take-up cassette	Max. 100ft of 4 mil thick photographic material
Cassette dimensions	24.6" x 6.1" x 6.5"
Register system	Bacher ‘Control 2000’ or Stoesser format head punch standard
Main voltage	90-132 Vac; 180-264 Vac; 47-63Hz
Power Consumption	Max. 500 Va
Ambient temperature	65-86 degrees F
Humidity	45-85% non condensing
Dimensions (W x H x D)	47.2" x 43.3" x 29.5"
Weight	Approx. 661 lbs
Interfaces	SpeedWay interface a high speed interface for bitmap transmission and communications, interface; for connecting an online processor
Option	Online processor

*Above information is for reference purposes only	TOP
**MKL is an independent equipment dealer

 

Linotype Hell 3030 Drum Imagesetter

	Imaging:
Max Image Area:	43.70 x 29.53" (111 x 75 cm)
Lines per Screen Dot:	16 or 24
Screen Rulings:	Up to 200 lines/inch (80 lines/cm)
	Rotational Speeds of Drum:
Drum Speed 1:	19.49 revolutions/second
Drum Speed 2:	13 revolutions/second
Drum Speed 3:	6.5 revolutions/second
	Exposure Output:
8.3" x 11.7" (A4) color set in scanner/recorder mode at 150 lines/inch (60 lines/cm):	4.6 min

	Technology:
Design:	External Drum
	Physical Characteristics:
Imagesetter Size (HxWxD):	53.15" x 71.65" x 43.31" (1350 x 1820 x 1100 mm)
Imagesetter Weight:	2271 lbs (1030 kg)
Seperate Control Unit for Scanner    (H x W x D):	43.3" x 27.56" x 31.50"
Controller Weight:	176 lbs (80 kg)
	Electrical Requirements:
Volts:	220 V
	380 V, 2.7 kVA

*Above information is for reference purposes only	TOP
**MKL is an independent equipment dealer

 

Linotype Hell 3020 Drum Imagesetter

	Imaging:
Max Image Area:	21.65" x 25.59"
Lines per Screen Dot:	16 or 24
Screen Rulings:	Up to 200 lines/inch (80 lines/cm)
	Drum Speed:
Drum Speed 1:	22.52 revolutions/second
Drum Speed 2:	15 revolutions/second
Drum Speed 3:	7.5 revolutions/second
	Exposure Output:
8.3" x 11.7" (A4) color set in scanner/recorder mode at 150 lines/inch (60 lines/cm):	3.9 min

	Technology:
Design:	External Drum
	Physical Characteristics:
Imagesetter Size (HxWxD):	53.15" x 49.21" 43.31" (1350 x 1250 x 1100 mm)
Imagesetter Weight:	2007 lbs (910 kg)
Seperate Control Unit for Scanner    (H x W x D):	43.3" x 27.56" x 31.50"
Controller Weight:	176 lbs (80 kg)
	Electrical Requirements:
Volts:	220 V
	380 V, 2.7 kVA

*Above information is for reference purposes only	TOP
**MKL is an independent equipment dealer

 

 

Linotype-Hell 330 Capstan Imagesetter
CALL FOR PRICES

*Above information is for reference purposes only	TOP
**MKL is an independent equipment dealer

  

    

MKL is an independent equipment dealer * All equipment is based on availability
 

bill@mklinc.com marc@mklinc.com jeff@mklinc.com

Copyright © 1998 MKL Pre-press Electronics. All Rights Reserved.
Reproduction without permission is strictly prohibited.